Dodge 4.7 287 V8 High Output engine rebuild from a 2002 Dodge Ram 1500 came in the shop for a complete remanufacture. As you can see our resident inspector came over to check it out.
The Chrysler Dodge Power Tech 4.7L with HO engine fit various applications:
2002-2004 Jeep Grand Cherokee
2002-2007 Dodge Dakota
2002-2007 Dodge Ram 1500
2006-2007 Mitsubishi Raider
After a visual inspection to look for any obvious cracks or breaks, we tore it apart and threw it into the hot tank. The cylinder heads and block got a good scrubbing another hot tank, then a coat of paint to seal out any debris.
Engine block went onto the bore machine to work on the cylinders. Meanwhile, we starting a valve job on the cylinder heads.
Dodge 4.7 Machine Services
Cylinder Head: Resurfaced, cut valve seats, grind the valves, clean and assembled the heads. Bore and honed the cylinders on the engine block. Grind the crank and cam.
We used a Dodge 4.7 HO Engine Rebuild Kit with New pistons, rings, gaskets, bearings, freeze plugs, oil pump, thrust washers and timing set to rebuild this long block. You can get a kit for your rebuild too, contact us.
We installed the new engine parts and completed the assembly.
Engine is ready for pick up and installation.
We rebuild Dodge 4.7 High Output and Non HO engines at our Los Angeles machine shop on a regular basis. Call if you need your engine rebuilt. Call if you need machine shop services, bore and hone, decking, or a valve job.
Are you doing your own rebuild and you need an Engine Rebuild Kit for Dodge 4.7 High Output? We’ve got you covered.
Follow Link below to pick up a Dodge Engine Kit
2000-2007 Dodge 4.7 Engine Rebuild Kits
Call if you don’t see your engine kit or you need Engine Rebuilding Service.
818 767-6603
Use the Contact form if you prefer.
We rebuild the Dodge 4.7 Non-HO versions also. We carry the engine rebuild kit for it too.
Richie
Hi there, I have a 2005 dodge Dakota here in Iowa that committed suicide by timing chain. Bent a valve and the crank broke. I dunno if you deal in shipping of these things or not? But I’m definitely not in LA. If so, shoot me a price for a full rebuild and optional H.O. Upgrade.
Please and thank you
Frank
Hi can I get a quote for 2001 dakota 4.7 and optional upgrades. Thanks
ray thomas
I have a 2003 Quad Cab 4×4 Dakota with the 4.7.Can i replace it with a 4.7 HO? About how much would that cost? If you built me a 4.7 HO plus decked the heads and block ball park price.
Peter Keiley
2004 4.7 for a ram 1500. Need a price for a rebuilt engine. Does the standard engine have the availability for a performance camshaft upgrade?
Valley Auto Parts
Peter,
I emailed you an estimate for your Dodge 4.7 engine rebuild.
Zach
2004 4.7 for a ram 1500. Need a price for a rebuilt engine.
Valley Auto Parts
Zach,
I emailed you an estimate for a Remanufactured 4.7 engine and an estimate to rebuild your good core.
Regards,
Lucinda
Daniel Paulson
I have a 2001 Dodge Dakota 4×4 with a 4.7 and would like to get a price for a rebuild kit and also a price for your shop to rebuild it if it was shipped to you with return shipping on me.also I was want to see about performance mods that your shop can do the engine that would be suitable for a everyday driver. thankyou.
Valley Auto Parts
Daniel,
I emailed you an estimate for a rebuild and pricing for an Engine Rebuild Kit.
Thanks, Lucinda
Gilbert Patron
I have a 4.7 2002 slt dodge ram 1500 I would like it rebulit how much will it cost out the door
CHENG CHI HUANG
I need a quote for a rebuild for 2004 dodge ram 1500 SLT 4.7 engine.Engine overheated and Timing Cover Leak coolant. The engine is completely dead.
Valley Auto Parts
Cheng,
Thanks for contacting us, I emailed you a detailed estimate.
Lucinda
Jason
Need a quote on a 4.7 for a 2005 ram 1500. What kind of horsepower and torque are your engines producing?
Valley Auto Parts
Jason,
I emailed you an estimate to rebuild your Dodge 4.7 engine.
Thanks
Lucinda
Sovanh Vanhsy
Whats an estimated cost to rebuild engine for a 2000 dodge durango 4.7L SLT from Stockton, Ca? Thanks.
Valley Auto Parts
Sovanh,
Thanks for contacting us for an estimate to rebuild your Dodge 4.7 engine.
I emailed you a detailed estimate.
Thanks
Lucinda
Rodrigo A. Szymanski
Hi Lucinda:
Congratulations! I did not know VAP owns Los Angeles Auto Machine Shop, I like my colleague the
“resident inspector” we do the same job for our respective companies.
Thank You! for your continuous support for our products, any questions please, let us know and we will attend to it right away.
Sincerely, Rodrigo
Valley Auto Parts
Rodrigo,
Yes, this is our photo blog of the engine rebuilds, valve jobs, and machine services we provide.
Our shop kitty, the “resident inspector”, likes to keep involved. She splits her time as the Official Greeter too.
We appreciate your quality products!
Thanks
Lucinda
alfred morales jr
I need a quote for a rebuild for 2003 dodge ram 1500 4.7 engine. I do not have a core
Valley Auto Parts
Alfred,
Remanufactured Dodge 4.7 SOHC 16V V8 NON-HO long block Engine is $1695.00 Exchanged plus Tax.
Core Charge is $500.00
Need to know which version you need JTEC (16 tooth crank wheel) or NGC (32 tooth crank wheel).
This is Block and heads only; no covers or oil pan.
Shipping is extra.
I also sent you an email.
Thanks
Lucinda
John
I have a 2001 4.7l Durango . Need a quote for a full rebuild. I have the HO cams to be installed I can send to you with engine. Please let me know thank you
John
Valley Auto Parts
John,
I just emailed you an estimate to rebuild your Dodge 4.7 engine.
Thanks
VAP
John
Can u resend that quote for the 2001 4.7 Durango build to me please
John
Valley Auto Parts
John,
I resent it to your email again. Let me know if you have any questions.
Thanks,
Lucinda
Carl Barnes
need a rebuilt short block for a 1999 jeep grand charokee 4.7 liter . do you stock them ? & what is the cost ?
Lucinda
Carl,
Thanks for inquiring on a Jeep 4.7.
Yes, we do stock the Jeep 4.7 short Blocks.
How many teeth does yours have? 16 or 32? Is it an NGC or JTEC?
Let me know, I’ll email you.
Thanks
Lucinda
Marcus
How much for an 4.7l HO rebuild on 2001 grand cherokee?
Lucinda
Marcus,
Thanks for contacting us, I emailed you an estimate to rebuild your Jeep 4.7 HO engine.
Lucinda
Kirby W
Hi I am looking for a set of HO heads to a 2002 Jeep Grand Cherokee eight cyclinder. Also can you send me a quote for a 4.7 rebuilt.
Lucinda
Kirby,
Thanks for contacting us, I just sent you an email with a rebuild estimate.
Thanks
Lucinda
cody bailey
I need a set of heads for a 2004 dodge Durango 4.7l dual over head cams remanufactured would be great please get in contact with me
Lucinda
Cody,
I checked our stock, I’m sending you a direct email with prices.
Thanks
Lucinda
Ron Shepherd
What would the cost be to rebuild a 2004 4.7 HO for my Jeep Grand Cherokee?
Lucinda
Ron, Thanks for contacting us for an estimate on your Jeep.
I sent you an estimate to your email address.
Thanks
Lucinda
Christopher
I have a 04 ram 1500 4.7 non egr block that needs to be rebuilt. Can i get a quote?
Lucinda
Christopher,
Thanks for your inquiry. I sent you an email with an estimate for a Long Block and a Short Block.
Thanks
Lucinda
Danny
Hello,
What is the price of a fully remanufactured V8 HO?
Do you do power upgrades for it?
My jeep is a 2002 Power Tech, I heard that besides the hardware and computer, I will need some wiring to add to it. Can you assist with those steps?
Thanks
Danny
Lucinda
Danny,
I sent you an email with an estimate to rebuild your 02 Jeep 4.7 HO engine.
Reply to it if you have any questions.
Thanks
Lucinda
Preston
04 jeep grand cherokee 4.7 H.O. rebuild cost and what warranty do you offer?
Lucinda
Preston,
Happy New Year! I emailed you a quote to rebuild your Jeep 4.7 HO engine.
Our warranty is 1 year for non-commercial use.
Thanks
Lucinda
Mike Steffick
Hello, I have a 2001 Dakota with 4.7 and 5 speed manual. I would really like to swap or you build for me. Would you be able to send me an estimate!
Thanks very much
Mike Steffick
Joe’s Flies Fishing
Lucinda
Mike,
Happy New Year! I’m emailing you a quote to rebuild your Dodge 4.7 engine.
Thanks
Lucinda
Glenn Buxton
I have a 2002 Durango with a 4.7 engine. Daughter needs car when 16 in March. Runs but needs a rebuild. How much, how soon?
Lucinda
Glenn,
Thanks for your inquiry. I sent an estimate to rebuild your Dodge 4.7 to your email address.
Happy Holidays
Lucinda
Robert w
Have a 04 grand cherokee with a 4.7l ho how much to rebuild
Lucinda
Robert,
Thanks for contacting us for a quote on your HO rebuild.
I’m sending you an email with the price.
Thanks
Lucinda
Derek
Can I get a quote for a 2002 dodge 4.7 with a .040 bore over and a pssoible striker kit with HO cams?
Lucinda
Derek,
I sent you a quote to your email address.
Thanks
Lucinda
Mike
What is the price on a rebuild of a 2002 Jeep Grand Cherokee 4.7l and is it possible to give it a bit more pep without losing reliability during the process of the rebuild?
Lucinda
Mike,
I sent you a quote to your email address. Plus a link about “Chip Tuning”.
Thanks
Lucinda
Abe
Hi I need a quote for 2002 4.7 short block.
Lucinda
Abe,
Thanks for contacting us, I’m sending a quote to your email address for the Short Block.
Lucinda
Jose Villarruel
How much to rebuild a 4.7 for a 2000 Durango? Do you also install?
Lucinda
Jose,
I’m sending you a quote for a rebuild to your email address.
Thank You
Lucinda
JOSE VILLARRUEL
Lucinda, can you resend me the quote for my 2000 Durango for the 4.7 rebuild and install? Never got it
Lucinda
Jose,
I resent it the other day, did you get it?
If not, check the email you entered or maybe it went to your Spam folder.
Thanks
Lucinda
Peter
What is cost range to rebuild 2002 Jeep Overland 4.7 HO engine?
Bought it running rough and smoking. Now it started knocking. No coolant or oil loss. Looks like new water pump so I believe it may have overheated.
Thanks
Peter
Palo Alto, CA 94306
Lucinda
Peter,
I’ll send you a quote to your email address.
Thanks
Lucinda
cody
Hello, can I get a quote for 2001 dodge dakota 4.7. I was also wondering if you do optional upgrades? thanks
Tony
Quote for a 2002 4.7L?
What’s the price for a rebuild on a 2002 dodge ram 4.7
Lucinda
Tony,
I sent you a quote to your email address.
Call if you have any questions.
Thanks
Lucinda
Jim Janoso
Hi,
I am looking this summer to install a fresh engine in my 2003 Dakota w/ 5 speed manual. I really want to get a HP and Torque increase as I tow alot with it. The current engine has 150K on it. It has run on synthetic since 60K when I bought it. It is tired and starting to make ticking of the lash adjusters and the timing chain tensioners are staring to get weak I think.
So what would be best? send you my Engine for rebuild? How long and how much ( 325-400hp) Or would it be better to have you send me a new Long block H.O. Motor?
Thanks I need to budget for this.
Jim Janoso
Roundup, MT 59072
Lucinda
Jim,
Thanks for contacting us, I’m sending you an estimate to your email.
Lucinda
Hecto
I need a quote for 2002 dodge 1500 4.7
Lucinda
Hecto,
Thanks for contacting us, I’m sending you an estimate to your email.
Thanks
Lucinda
don andreasen
apparently overheated my 1999 Jeep Grand Cherokee 4.7L yesterday but gauge didn’t indicate it. How much would you charge for the top end redo ? I had the engine out at 55,000 miles ago to replace the lower end and went through everything except the upper end. Was running at around 210 occasionally creep over. I replaced the Electric fan relay but yesterday the AC switch wouldn’t power the fan. I have been slowly using coolant but I could smell it in the engine bay but nothing visible so I was topping off with distilled water probably diluted it too much and it boiled over losing water without really noticing it. Thanks
Lucinda
Don,
Thanks for contacting about your Jeep.
I’m sending an estimate to your email address.
Thanks
Lucinda
Antonio Espinoza
Need a quote for a rebuilt 4.7 for a 02 dakota.
Lucinda
Antonio,
Thanks for contacting us for a quote. I’ll get back to you at the email address you provided by Monday.
Thanks
Lucinda
Rich
Looking for replacement cylinder heads for a 2004 Jeep Grand Cherokee 4.7L HO (both left and right side).
Can someone send me a quote?
Lucinda
Rich,
I will check stock and get back to you. I will send an email to you directly.
Happy Holidays, Lucinda
Ross
Looking for head solution. Of the 2 off my 91 chevy 350, 1 is cracked, the other needs the cleanup (resurface and mine as well do valve job)
derek
What’s the price for a rebuild on a 2002 dodge ram 4.7?
Lucinda
Derek,
I’m sending you a direct email with a quote.
Thanks!
Ray Lopez
I am looking for a set of 2002+ 4.7 high out put cams with 08 intake manifold. I have the standard cams and intake from a 2000 4.7.
I would be grateful for any help I could get.
Please let me know if you have these parts or know of anyone else who does.
Thanks,
Ray
Lucinda
Ray,
I’ll check into the Cams for you. In my quick search, I see they are scarce. I’ll keep digging and get back to you.
Thanks
Lucinda
Justin Harris
I have a 2000 Durango SLT 4.7, with 150k+ on it. Still runs quite well, but had overheated a time or two and still ran perfectly fine for 2 years with blown head gaskets. Had my local mechanic here put new O.E. heads and gaskets on last year, I think the gasket might’ve gone again as I get a strong coolant odor when running, does not overheat however. So I wanted to shop around for prices to have it rebuilt to H.O. specs if possible for that model/year? And if so would you repurpose parts that are still in good shaoe from existing engine? Any help/info. would be appreciated immensely