Los Angeles Auto Machine Shop banner
installing new timing set for Dodge 4.7

Dodge 4.7 High Output remanufactured engine

Auto Machine Shop, Dodge Engines, Remanufactured Engines 74 Comments

Dodge 4.7 287 V8 High Output engine rebuild from a 2002  Dodge Ram 1500 came in the shop for a complete remanufacture.  As you can see our resident inspector came over to check it out.Dodge 4.7 engine inspection

 

The Chrysler Dodge Power Tech 4.7L with HO engine fit various applications:

2002-2004 Jeep Grand Cherokee
2002-2007 Dodge Dakota
2002-2007 Dodge Ram 1500
2006-2007 Mitsubishi Raider

After a visual inspection to look for any obvious cracks or breaks, we tore it apart and threw it into the hot tank.  The cylinder heads and block got a good scrubbing another hot tank, then a coat of paint to seal out any debris.

Engine block went onto the bore machine to work on the cylinders. Meanwhile, we starting a valve job on the cylinder heads.

Dodge 4.7 Machine Services

Cylinder Head: Resurfaced, cut valve seats, grind the valves, clean and assembled the heads. Bore and honed the cylinders on the engine block. Grind the crank and cam.

We used a Dodge 4.7 HO Engine Rebuild Kit with New pistons, rings, gaskets, bearings, freeze plugs, oil pump, thrust washers and timing set to rebuild this long block.  You can get a kit for your rebuild too, contact us.

Bolting on heads- Dodge 4.7 HO engine

We installed the new engine parts and completed the assembly.

Long block assembly on Dodge 4.7 HO engine

Engine is ready for pick up and installation.

Remanufactured Dodge 4.7 High Output long block engine

We rebuild Dodge 4.7 High Output and Non HO engines at our Los Angeles machine shop on a regular basis.  Call if you need your engine rebuilt.  Call if you need machine shop services, bore and hone, decking, or a valve job.

Are you doing your own rebuild and you need an Engine Rebuild Kit for Dodge 4.7 High Output?  We’ve got you covered.

Follow Link below to pick up a Dodge Engine Kit

 2000-2007 Dodge 4.7 Engine Rebuild Kits 

 

05-07 Dodge Dakota 4.7 HO engine rebuild kit
05-07 Dodge 4.7 HO Engine Rebuild Kit (link)

Call if you don’t see your engine kit or you need Engine Rebuilding Service.
818 767-6603

Use the Contact form if you prefer.

We rebuild the Dodge 4.7 Non-HO versions also. We carry the engine rebuild kit for it too.

 

 

Tags

74 Comments

  1. Peter Keiley
    September 23, 20199:32 pm -

    2004 4.7 for a ram 1500. Need a price for a rebuilt engine. Does the standard engine have the availability for a performance camshaft upgrade?

    Reply
  2. CHENG CHI HUANG
    July 3, 201911:56 pm -

    I need a quote for a rebuild for 2004 dodge ram 1500 SLT 4.7 engine.Engine overheated and Timing Cover Leak coolant. The engine is completely dead.

    Reply
  3. Sovanh Vanhsy
    June 22, 201912:11 pm -

    Whats an estimated cost to rebuild engine for a 2000 dodge durango 4.7L SLT from Stockton, Ca? Thanks.

    Reply
  4. Rodrigo A. Szymanski
    May 2, 20191:13 pm -

    Hi Lucinda:
    Congratulations! I did not know VAP owns Los Angeles Auto Machine Shop, I like my colleague the
    “resident inspector” we do the same job for our respective companies.
    Thank You! for your continuous support for our products, any questions please, let us know and we will attend to it right away.
    Sincerely, Rodrigo

    Reply
    • Valley Auto Parts
      May 3, 20197:21 am -

      Rodrigo,
      Yes, this is our photo blog of the engine rebuilds, valve jobs, and machine services we provide.
      Our shop kitty, the “resident inspector”, likes to keep involved. She splits her time as the Official Greeter too.
      We appreciate your quality products!
      Thanks
      Lucinda

      Reply
  5. alfred morales jr
    April 6, 20198:13 pm -

    I need a quote for a rebuild for 2003 dodge ram 1500 4.7 engine. I do not have a core

    Reply
    • Valley Auto Parts
      April 19, 20191:07 pm -

      Alfred,
      Remanufactured Dodge 4.7 SOHC 16V V8 NON-HO long block Engine is $1695.00 Exchanged plus Tax.
      Core Charge is $500.00

      Need to know which version you need JTEC (16 tooth crank wheel) or NGC (32 tooth crank wheel).
      This is Block and heads only; no covers or oil pan.
      Shipping is extra.

      I also sent you an email.
      Thanks
      Lucinda

      Reply
  6. John
    March 25, 20189:28 am -

    I have a 2001 4.7l Durango . Need a quote for a full rebuild. I have the HO cams to be installed I can send to you with engine. Please let me know thank you

    John

    Reply
  7. Carl Barnes
    May 23, 20173:23 pm -

    need a rebuilt short block for a 1999 jeep grand charokee 4.7 liter . do you stock them ? & what is the cost ?

    Reply
    • Lucinda
      May 23, 20175:31 pm -

      Carl,
      Thanks for inquiring on a Jeep 4.7.
      Yes, we do stock the Jeep 4.7 short Blocks.
      How many teeth does yours have? 16 or 32? Is it an NGC or JTEC?
      Let me know, I’ll email you.
      Thanks
      Lucinda

      Reply
  8. Marcus
    December 11, 20166:32 pm -

    How much for an 4.7l HO rebuild on 2001 grand cherokee?

    Reply
  9. Kirby W
    December 9, 20162:54 pm -

    Hi I am looking for a set of HO heads to a 2002 Jeep Grand Cherokee eight cyclinder. Also can you send me a quote for a 4.7 rebuilt.

    Reply
  10. cody bailey
    October 3, 201610:37 pm -

    I need a set of heads for a 2004 dodge Durango 4.7l dual over head cams remanufactured would be great please get in contact with me

    Reply
  11. Ron Shepherd
    June 17, 20169:13 pm -

    What would the cost be to rebuild a 2004 4.7 HO for my Jeep Grand Cherokee?

    Reply
  12. Christopher
    March 6, 20165:46 am -

    I have a 04 ram 1500 4.7 non egr block that needs to be rebuilt. Can i get a quote?

    Reply
    • Lucinda
      March 7, 201610:13 am -

      Christopher,
      Thanks for your inquiry. I sent you an email with an estimate for a Long Block and a Short Block.

      Thanks
      Lucinda

      Reply
  13. Danny
    February 23, 20162:36 am -

    Hello,

    What is the price of a fully remanufactured V8 HO?
    Do you do power upgrades for it?

    My jeep is a 2002 Power Tech, I heard that besides the hardware and computer, I will need some wiring to add to it. Can you assist with those steps?

    Thanks
    Danny

    Reply
  14. Preston
    January 4, 20167:49 pm -

    04 jeep grand cherokee 4.7 H.O. rebuild cost and what warranty do you offer?

    Reply
    • Lucinda
      January 4, 20169:51 pm -

      Preston,
      Happy New Year! I emailed you a quote to rebuild your Jeep 4.7 HO engine.
      Our warranty is 1 year for non-commercial use.

      Thanks
      Lucinda

      Reply
  15. Mike Steffick
    January 1, 20161:26 am -

    Hello, I have a 2001 Dakota with 4.7 and 5 speed manual. I would really like to swap or you build for me. Would you be able to send me an estimate!

    Thanks very much
    Mike Steffick
    Joe’s Flies Fishing

    Reply
  16. Glenn Buxton
    December 30, 201512:11 am -

    I have a 2002 Durango with a 4.7 engine. Daughter needs car when 16 in March. Runs but needs a rebuild. How much, how soon?

    Reply
  17. Robert w
    October 18, 20153:42 pm -

    Have a 04 grand cherokee with a 4.7l ho how much to rebuild

    Reply
  18. Derek
    October 10, 20158:01 am -

    Can I get a quote for a 2002 dodge 4.7 with a .040 bore over and a pssoible striker kit with HO cams?

    Reply
  19. Mike
    September 16, 20151:38 am -

    What is the price on a rebuild of a 2002 Jeep Grand Cherokee 4.7l and is it possible to give it a bit more pep without losing reliability during the process of the rebuild?

    Reply
  20. Abe
    September 2, 20159:15 pm -

    Hi I need a quote for 2002 4.7 short block.

    Reply
  21. Jose Villarruel
    July 23, 20157:59 pm -

    How much to rebuild a 4.7 for a 2000 Durango? Do you also install?

    Reply
    • Lucinda
      July 24, 20156:57 am -

      Jose,
      I’m sending you a quote for a rebuild to your email address.
      Thank You
      Lucinda

      Reply
      • JOSE VILLARRUEL
        July 26, 20158:37 pm -

        Lucinda, can you resend me the quote for my 2000 Durango for the 4.7 rebuild and install? Never got it

        Reply
        • Lucinda
          July 31, 20157:08 pm -

          Jose,
          I resent it the other day, did you get it?
          If not, check the email you entered or maybe it went to your Spam folder.
          Thanks
          Lucinda

          Reply
  22. Peter
    July 17, 20158:25 am -

    What is cost range to rebuild 2002 Jeep Overland 4.7 HO engine?
    Bought it running rough and smoking. Now it started knocking. No coolant or oil loss. Looks like new water pump so I believe it may have overheated.
    Thanks
    Peter

    Palo Alto, CA 94306

    Reply
  23. cody
    June 6, 201510:32 am -

    Hello, can I get a quote for 2001 dodge dakota 4.7. I was also wondering if you do optional upgrades? thanks

    Reply
  24. Tony
    May 12, 20154:26 pm -

    Quote for a 2002 4.7L?
    What’s the price for a rebuild on a 2002 dodge ram 4.7

    Reply
  25. Jim Janoso
    April 12, 20154:53 pm -

    Hi,

    I am looking this summer to install a fresh engine in my 2003 Dakota w/ 5 speed manual. I really want to get a HP and Torque increase as I tow alot with it. The current engine has 150K on it. It has run on synthetic since 60K when I bought it. It is tired and starting to make ticking of the lash adjusters and the timing chain tensioners are staring to get weak I think.

    So what would be best? send you my Engine for rebuild? How long and how much ( 325-400hp) Or would it be better to have you send me a new Long block H.O. Motor?

    Thanks I need to budget for this.

    Jim Janoso
    Roundup, MT 59072

    Reply
  26. Hecto
    February 8, 20156:31 pm -

    I need a quote for 2002 dodge 1500 4.7

    Reply
  27. don andreasen
    January 24, 201512:21 pm -

    apparently overheated my 1999 Jeep Grand Cherokee 4.7L yesterday but gauge didn’t indicate it. How much would you charge for the top end redo ? I had the engine out at 55,000 miles ago to replace the lower end and went through everything except the upper end. Was running at around 210 occasionally creep over. I replaced the Electric fan relay but yesterday the AC switch wouldn’t power the fan. I have been slowly using coolant but I could smell it in the engine bay but nothing visible so I was topping off with distilled water probably diluted it too much and it boiled over losing water without really noticing it. Thanks

    Reply
  28. Antonio Espinoza
    January 10, 201510:08 pm -

    Need a quote for a rebuilt 4.7 for a 02 dakota.

    Reply
  29. Rich
    December 23, 20142:56 pm -

    Looking for replacement cylinder heads for a 2004 Jeep Grand Cherokee 4.7L HO (both left and right side).

    Can someone send me a quote?

    Reply
  30. Ross
    December 4, 201410:25 pm -

    Looking for head solution. Of the 2 off my 91 chevy 350, 1 is cracked, the other needs the cleanup (resurface and mine as well do valve job)

    Reply
  31. derek
    November 25, 20148:06 pm -

    What’s the price for a rebuild on a 2002 dodge ram 4.7?

    Reply
  32. Ray Lopez
    September 9, 20145:28 am -

    I am looking for a set of 2002+ 4.7 high out put cams with 08 intake manifold. I have the standard cams and intake from a 2000 4.7.

    I would be grateful for any help I could get.

    Please let me know if you have these parts or know of anyone else who does.

    Thanks,

    Ray

    Reply
    • Lucinda
      September 9, 20149:23 am -

      Ray,
      I’ll check into the Cams for you. In my quick search, I see they are scarce. I’ll keep digging and get back to you.
      Thanks
      Lucinda

      Reply
    • Justin Harris
      April 4, 20208:20 am -

      I have a 2000 Durango SLT 4.7, with 150k+ on it. Still runs quite well, but had overheated a time or two and still ran perfectly fine for 2 years with blown head gaskets. Had my local mechanic here put new O.E. heads and gaskets on last year, I think the gasket might’ve gone again as I get a strong coolant odor when running, does not overheat however. So I wanted to shop around for prices to have it rebuilt to H.O. specs if possible for that model/year? And if so would you repurpose parts that are still in good shaoe from existing engine? Any help/info. would be appreciated immensely

      Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Valley Auto Parts and Engines- Parts and service banner