Los Angeles Auto Machine Shop banner
Remanufactured 63 amc rambler 196 3.2 engine

63′ AMC Rambler 196 3.2 Remanufactured Engine

AMC Rambler 196 Engine

1963 AMC Rambler 196 3.2 OHV Straight 6 long block engine rebuild.  These engines were produced from 1952 through 1965 in two versions, (OHV) overhead valve and flathead (L-head) side valve versions.

Rebuild Agenda:
Teardown and Inspection, Hot tank and clean, and Magnuflux for cracks.
Machine Service: Bore and Hone, Grind Crank and Cam, and Valve Job
Clean, Paint, and Assemble the Long Block.

We rebuilt this long block with new pistons, rings, bearings, gaskets, timing components, freeze plugs and oil pump.  First it went to the hot tank machine for a good degreasing.  Engine block was bore and honed.  Cylinder head got a basic valve job- resurfaced head, grind the valves, cut seats, clean, painted and assembled.  Any broken or missing parts were replaced.

Check out the progress photos.  Block work up first.

AMC 196 Valve Job

Cylinder head repairs up next.  Resurfaced cylinder head, cut valve seats, grind valves, installed new guides and valve stem seals, cleaned, painted and assembled the cylinder head.

Short block assembly.  Crankshaft and Cam were re-ground.  Engine kit parts ready to install.  We put in new pistons, rings, bearings, gaskets, freeze plugs, timing, and oil pump.  Not many pics of the assembly.  We’ve got engine parts for your AMC Rambler 196, contact us for your Engine Kit.

Completed long block rebuild on the AMC Rambler 196

Remanufactured 1963 AMC Rambler 196 3.2 I6 engine rebuilt at our Los Angeles machine shop.

Remanufactured 63 amc rambler 196 3.2 engine

Engine rebuild parts available for your AMC Rambler 196 3.2 Straight 6 rebuild project. Pistons, rings, engine bearings, gaskets, timing components, oil pump, lifters, intake/exhaust valves and more.

Engine block and cylinder head repair work available in our Los Angeles machine shop for your AMC Rambler 196 3.2 engine.

We can rebuild your good core, provide machine services, or get you an Engine kit.  It’s easy.

Call us 818 767-6603

Use the Contact page and give us details.

Tags

32 Comments

  1. Ramon
    April 6, 20229:07 pm -

    I need a quote to rebuild my 1964 AMC 195.6 OHV. Do you do removal & install?

    Reply
  2. Erik
    September 6, 20215:51 pm -

    I have a 1963 196 Cast iron. How much for a rebuild?

    Reply
  3. Greg Boyd
    October 22, 201911:29 am -

    Good Morning
    it sounds like you guys know Rambler engines. I have a cast iron ovh 196 that is in
    a 1961 Rambler American convertible. I am deciding if I should just have the head rebuilt
    or the entire engine can you give me costs the car appears to have about 97000 miles
    not sure the life of a 196
    Thanks
    Greg

    Reply
  4. Ian
    March 16, 20189:45 pm -

    I have a 1960 rambler wagon that needs a motor. I have a donor motor I couldn’t get running, that I believe is mostly tore down. I live in Washington state so I’m unsure of logistics, but assuming I could get it down there, what would I be looking at for a rebuild?

    Reply
  5. Eric Peterson
    December 10, 20171:07 pm -

    Wondering if you still have the rebuilt 196 on your site. I am interested in the one you have or what it would run to have you do mine. 63 Rambler 196. Thanks for your time.

    Reply
  6. IW
    February 24, 20178:30 pm -

    What’s a job like this cost? I’m in Los Angeles and have a 64 AMC American that has a bad ring. I’m burning lots of oil.

    Reply
  7. Greg
    January 24, 20173:22 pm -

    I have a 1960 american rambler that needs an engine rebuild.

    Reply
  8. Mark Lehman
    October 21, 20166:20 am -

    The 195.6 engine was a L-head (flathead) engine from 1941 until 1965. The OHV version came out in 1956 not 1952. It was the same flathead engine converted to OHV.

    Reply
    • Mark Lehman
      October 21, 20166:26 am -

      I guess I should have added that 1952 Was the first year it was enlarged to 195.6 to be completely clear. This engine was developed for the smaller Nash 600 and later the Rambler. It was produced along with the big “7 main bearing” Six used in the Nash Ambassador till 1956.

      Reply
  9. Joe Fitman
    June 18, 20168:08 am -

    I have a 1964 classic 660. Someone stole the car and after getting it back, the engine is in pieces. How much do you charge to do a complete rebuild of the engine?
    Thanks – Joe

    Reply
  10. Pat Graham
    February 23, 20165:58 pm -

    I have a 1961 Rambler convertible OVH 196 . My mechanic said it has a knock. The car needs to be looked at. Can you rebuild and get going ? Pat

    Reply
  11. Jerry
    October 5, 20159:53 pm -

    Regarding my 63 Rambler… Do you do carburetor work along with engine rebuilds? how about trannies?
    Thanks, Jerry

    Reply
    • Lucinda
      October 6, 20159:23 am -

      Jerry,
      Thanks for inquiring.
      Yes, we do carburetor work.
      No, we do not work on transmissions.

      I’ll send you an email with a quote on the engine rebuild and carb work.
      Thanks
      Lucinda

      Reply
  12. Dasn OBrien
    March 4, 20151:54 pm -

    Do you have any rebuilt 196 cast iron Rambler engines? If so how much?
    Thanks Dan

    Reply
  13. Mark Schmaling
    November 7, 20143:50 pm -

    Do have any 196 ohv heads around with no cracks for sale?

    Reply

Leave a Reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Valley Auto Parts and Engines- Parts and service banner